|
|
|
|
"The Original Design and Developer of the LED Turn Signal Kit for UTVs"
&
"The Original Design and Developer of the LED Turn Signal Kit with Emergency Flashers for ATVs"
|
|
|
|
|
|
|
|
|
Pioneer... Big Red MUV... FourTrax... Foreman... Rancher... Rubicon... Rincon... Recon
|
|
|
|
|
|
|
ATV & UTV Street Legal Kits
|
|
|
|
|
(EZTSK stock# 310 + 312 + your choice of TSK# 104, 105, 107-SM or 604)
|
|
|
|
|
Looking to make your Honda Pioneer street legal, Honda Big Red MUV street legal, Honda FourTrax street legal, Honda Foreman street legal, Honda Rancher street legal, Honda Rubicon street legal, Honda Rincon street legal or Honda Recon street legal, you have come to the right place. We have developed DOT approved street legal kits that will help you make your UTV (side-by-side) or ATV (quad) street legal.
|
|
|
Having a street legal Honda UTV or ATV is just awesome. With the right Honda street legal accessories, you can really tackle every type of terrain from pavement, to off-road trails and back again. We carry the kits and accessories you need to make your UTV (side-by-side) or ATV (quad) street legal. Including, D.O.T. approved horn kits, LED lighted license plate brackets and LED turn signal kits, so that you can safely and effectively ride on the streets in your area.
|
|
|
Our Honda street legal kits are intended to help you convert your off-road UTV (side-by-side) or ATV (quad) to a street legal ride in many USA states. Check with your local Motor Vehicle Division (MVD) or Department of Motor Vehicles (DMV) for what is needed in your area. Our kits include parts that are actually DOT approved items, that you will need while converting your off-road recreational vehicle to street legal status. Be careful, as our competitors out their Do Not use DOT approved parts and will sell you a kit that it is not DOT approved.
|
|
|
All states have their own requirements for street legal equipment, check with your local Department of Motor Vehicles (DMV) or Motor Vehicle Division (MVD), for your local requirements. You can click on Street Legal Information to check our website for your state requirements.
|
|
|
Most states require a Horn, Lighted License Plate and Turn Signals. Although, not all states require turn signals (hand signals are ok), we highly recommend them for your added safety. We know through experience that some drivers DO NOT know what hand signals are.
|
|
|
I get asked a few times every month, why don’t you use the UTV/ATV rear OEM lights for the rear turn signals. The answer is very simple, I developed my Turn Signal Kits (TSK) to be completely independent for three main reasons. ONE, you do not want any feedback from the LED Electronic Flasher into the ECU of your UTV/ATV, that can cause problems with your machine and are very expensive to replace. TWO, you do not want to affect (invalidate) your warranty by tapping into any existing OEM lights or wiring. THREE, you want both rear stop lights when activating the turn signals (like our automobiles), not just one. With all my different kits you will never have these concerns or issues.
|
|
|
|
|
Get Only What You Need to Make Your Honda Street Legal!
|
|
Our street legal kits consist of a Horn Kit (stock# 310) + LED Lighted License Plate Bracket (stock# 312)
+ whichever Turn Signal Kit you like (stock# 104, 105, 107 or 604).
We give you that choice so you can customize the turn signal kit to your desire.
You may only need turn signals + license plate bracket (because you already have a horn)
and that is why we make the kits separate, so you can order just what you need.
|
|
|
|
The following list of UTVs and ATVs has our recommendations for Honda street legal kits,
but you can decide on which kits you want and need:
|
|
|
|
|
|
|
|
|
|
|
Sample of Honda Big Red MUV Street Legal Kits (stock# 310 + 312 + 104)
|
|
|
|
|
|
|
Sample of Honda Big Red MUV Street Legal Kits (stock# 310 + 312 + 105)
|
|
|
|
|
|
|
Sample of Honda Street Legal Kits (stock# 310 + 312 + 107-SM)
|
|
|
|
|
|
|
Sample of Honda Pioneer Street Legal Kits (stock# 310 + 312 + 604)
|
|
|
|
|
|
|
Sample of Honda ATV Street Legal Kits (stock# 310 + 312 + 604)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Most states require the horn to be 120db or more, ours is 130db, very loud & legal in all states. This Loud FIAMM 12 Volt Horn Kit is perfect for making your recreational vehicle street legal or letting those around you know you’re there. This 12 volt horn kit comes complete with the mounting hardware, the RED Horn (push) Button, the inline fuse holder with 10 amp fuse, all the wiring, wire ties, the installation/wiring instructions with diagrams and pictures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This LED Lighted License Plate Bracket is perfect for making your recreational vehicle street legal in those states requiring a license plate . This LED Lighted License Plate Bracket comes complete with the mounting hardware, extra wire, connectors, wire ties and the installation/wiring instructions with pictures.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Turn Signal Switch (TSS) Mounting Hardware
|
|
|
2009-13 Honda Big Red MUV:
|
|
|
Note: the 2009-2013 Honda Big Red MUV use our custom turn signal switch (TSS) mounting bracket. This custom bracket was designed to mount the turn signal switch below the steering wheel on the dash. Order from the drop down box (below) b) TurnSignal Switch: 09-13 Honda BR MUV (TSS) Bracket.
|
|
|
|
|
2014-20 Honda Pioneer 500 / 700 / 1000 models:
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 12 volt Surface Mount LED Turn Signal Kit with 2 Surface Mounted ¾” inch Amber (front) and 2 Surface Mounted ¾” inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The SM LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four Surface Mounted LED super bright lights are ¾” inch round with an attached rubber grommet for quick mounting. They are surface mounted LED's with a slim-line design for mounting in small spaces (no brackets required). These SM LED’s are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, you don’t need any brackets for mounting lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for their added safety.
|
|
The SM LED Turn Signal Kit will fit all years for the Honda Big Red MUV models (check the TSS mounting hardware notes above).
Note: some like to customize their UTV with Double or Triple lights, order from the drop down box (below) a) Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Note: some like amber lights front and rear, order from the drop down box (below) a) Light Options: Amber Kit: All 4 Amber lights or Double Lights All Amber: 8 Amber lights or Triple Lights All Amber: 12 Amber lights.
|
|
- a) Option: Double or Triple Lights for a custom look!
- b) Option: Turn Signal Switch (TSS) mounting hardware for your particular year, make and model UTV.
- f) Option: UTV Wire and Connector Kit, this kit will make it easy to connect your turn signals.
- g) Option: Dash Indicators for those that want one or two dash indicators.
You can order whatever options you want with your Turn Signal Kit by using the drop down (V) menus below.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 12 volt LED Turn Signal Kit with 2 Amber (front) and 2 Red (rear) or your choice of all Amber DOT approved LED lights. The 4 LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four LED Lights are 4”x 2” rectangular with 16 (LED) Light Emitting Diodes each, polycarbonate lens & housing and hard wired with encapsulated electronics to eliminate corrosion. Also, you can substitute the 4"x2" rear LED lights for the 3/4" LED lights to add a custom look.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER. This special electronic LED flasher is also quite, no annoying clicking sounds.
The kit includes: 2 Amber and 2 Red or all Amber DOT approved LED lights, the Turn Signal Switch and the hardware to mount it to your steering column, the special LED Electronic Flasher, an in-line fuse holder, a 3 amp fuse, the self tapping screws for mounting the lights and flasher, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for their added safety.
|
|
The LED Turn Signal Kit will fit all years for the Honda Big Red MUV models (check the TSS mounting hardware notes above).
Note: some like amber lights front and rear, order from the drop down box (below) a) Light Options: Amber Kit: All 4 Amber lights.
|
|
- a) Option: Your choice of lights to make your UTV have a custom look.
- b) Option: Turn Signal Switch (TSS) mounting hardware for your particular year, make and model UTV.
- d) Option: If you don't have a rear bumper, you might want to use our Rear T-Brackets for mounting LED lights in the rear of your UTV.
- f) Option: Wire and Connector Kit, this kit will make it easy to connect your turn signals.
- g) Option: Dash Indicators for those that want one or two dash indicators.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
This is a 12 volt Surface Mount LED Running Lights & Turn Signal Kit with 2 Surface Mounted ¾” inch Amber (front) and 2 Surface Mounted ¾” inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The SM LED light kit comes with a turn signal switch, which has a pilot light for the turn signals and 4-way emergency flashers (hazard warning). The turn signal switch has a pull on flare tab for the 4-way hazard lights and the hardware to mount it to your steering column.
The four Surface Mounted LED Dual Mode super bright lights are ¾” inch round with an attached rubber grommet for quick mounting. They are surface mounted LED's with a slim-line design for mounting in small spaces (no brackets required). They have 3 lead wires each, one for ground, normal mode (running lights) and high mode (turn signals). These SM LED’s are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.
The special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The Running Light Switch is a LED waterproof illuminated rocker switch and is easy to install, vibration resistance, and will illuminate when turned on.
The kit includes: 2 Amber and 2 Red SM LED Dual Mode super bright lights with grommets, the Turn Signal Switch and the hardware to mount it to your steering column, the waterproof LED rocker switch, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, you don’t need any brackets for mounting lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
This turn signal switch has been installed on thousands of units, very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for their added safety.
|
|
The SM LED Running Lights & Turn Signal Kit will fit all years for the Honda Big Red MUV models (check the TSS mounting hardware notes above).
Note: some like to customize their UTV with Double or Triple lights, order from the drop down box (below) a) Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
|
|
- a) Option: Double or Triple Lights for a custom look!
- b) Option: Turn Signal Switch (TSS) mounting hardware for your particular year, make and model UTV.
- f) Option: UTV Wire and Connector Kit, this kit will make it easy to connect your turn signals.
- g) Option: Dash Indicators for those that want one or two dash indicators.
You can order whatever options you want with your Turn Signal Kit by using the drop down (V) menus below.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
(TS) Toggle Switch UTV / ATV LED Turn Signal Kit
(stock# 604)
|
|
This is a 12 volt Toggle Switch LED Turn Signal Kit with 2 Surface Mounted ¾” inch Amber (front) and 2 Surface Mounted ¾” inch Red (rear) Super Bright DOT approved LED lights (no brackets required). The UTV/ATV LED turn signal kit comes with two toggle switches and LED indicator lights for the turn signals and 4-way emergency flashers (hazard warning).
The 4 SM LED super bright lights are ¾” inch round with an attached rubber grommet for quick mounting. They are surface mounted LED’s with a slim-line design for mounting in small spaces (no brackets required). These SM LED’s are DOT approved, meet the P2PC requirements for 45 degree mounting and provide superior light output. They have a Space Saving Design, Hi Impact Acrylic Lens and Housing and are hard wired with Completely Resin Sealed Electronics to eliminate corrosion.
The Special LED Electronic Flasher has the 3 pin connections for LOAD, PILOT and POWER.
The kit includes: 2 Amber and 2 Red SM LED super bright lights with grommets, the 2 Toggle Switches and 2 LED indicator lights for the turn signals and 4-way emergency flashers, the special LED Electronic Flasher with mounting hardware, an ATC in-line fuse holder, a 3 amp fuse, the mounting installation instructions, the wiring instructions & diagram, and all the help and support you need from EZ Turn Signal Kits.
This kit can be easily installed, you don’t need any brackets for mounting the switches or lights, it does not go into any factory wiring, and it is a completely independent system that comes with the wiring diagram and instructions. Each wire has a different color and the wiring diagram shows where each colored wire goes. I include my phone number and e-mail address with the instructions, so if you have any questions about your installation you can contact me.
The turn signal toggle switches are very nice and easy to operate. The Motor Vehicle Department and your local police departments will be impressed. Everyone who rides on the street, off road, at the dunes or in congested riding areas, should have turn signals for their added safety.
Note: The steering column mounted turn signal switch is the safest and easiest to operate. We always recommend that you install a steering column mounted turn signal switch kit (stock# 104, 105 or 107-SM) on a UTV side-by-side (if you have the steering column space), for your added safety. A steering column mounted turn signal switch is located in the same area as your automobile, and comes natural for activating while keeping your eyes on the road.
|
|
The Toggle Switch UTV / ATV LED Turn Signal Kit will fit all years for the Honda Pioneer models and the ATV models.
Note: some like to customize their UTV/ATV with Double or Triple lights, order from the drop down box (below) a) Light Options: Double Lights: 4 Amber & 4 Red lights or Triple Lights: 6 Amber & 6 Red lights.
Note: some like amber lights front and rear, order from the drop down box (below) a) Light Options: Amber Kit: All 4 Amber lights or Double Lights All Amber: 8 Amber lights or Triple Lights All Amber: 12 Amber lights.
|
|
- a) Option: Double or Triple Lights for a custom look!
- f) Option: TS Wire and Connector Kit, this kit will make it easy to connect your turn signals.
You can order whatever options you want with your Turn Signal Kit by using the drop down (V) menus below.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional LED Lighting Accessories
|
|
|
Click on the pictures to learn more.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Not what your looking for, checkout these kits:
|
|
|
|
|
|
|
|
|
|
For more information:
EZ Turn Signal Kits
P. O. Box 1818
Glendale, AZ 85311-1818 US
E-mail: Cisco@LEDTSK.com
Glendale Office: (623) 435-1337
|
|
|
|
|
